## Why does st not handle utmp entries?
-Use the excellent tool of [utmp](http://git.suckless.org/utmp/) for this task.
+Use the excellent tool of [utmp](https://git.suckless.org/utmp/) for this task.
## Some _random program_ complains that st is unknown/not recognised/unsupported/whatever!
It means that st doesn’t have any terminfo entry on your system. Chances are
you did not `make install`. If you just want to test it without installing it,
-you can manualy run `tic -s st.info`.
+you can manually run `tic -sx st.info`.
## Nothing works, and nothing is said about an unknown terminal!
* Some programs don’t complain about the lacking st description and default to
another terminal. In that case see the question about terminfo.
-## I get some weird glitches/visual bug on _random program_!
-
-Try launching it with a different TERM: $ TERM=xterm myapp. toe(1) will give
-you a list of available terminals, but you’ll most likely switch between xterm,
-st or st-256color. The default value for TERM can be changed in config.h
-(TNAME).
-
## How do I scroll back up?
-Using a terminal multiplexer.
+* Using a terminal multiplexer.
+ * `st -e tmux` using C-b [
+ * `st -e screen` using C-a ESC
+* Using the excellent tool of [scroll](https://git.suckless.org/scroll/).
+* Using the scrollback [patch](https://st.suckless.org/patches/scrollback/).
-* `st -e tmux` using C-b [
-* `st -e screen` using C-a ESC
+## I would like to have utmp and/or scroll functionality by default
+
+You can add the absolute patch of both programs in your config.h
+file. You only have to modify the value of utmp and scroll variables.
## Why doesn't the Del key work in some programs?
always transmit.
In the st case smkx=E[?1hE= and rmkx=E[?1lE>, so it is mandatory that
-applications which want to test against keypad keys, have to send these
+applications which want to test against keypad keys send these
sequences.
-But buggy applications like bash and irssi for example don't do this. A fast
+But buggy applications (like bash and irssi, for example) don't do this. A fast
solution for them is to use the following command:
$ printf '\033[?1h\033=' >/dev/tty
or
- $ echo $(tput smkx) >/dev/tty
+ $ tput smkx
-In the case of bash readline is used. Readline has a different note in its
+In the case of bash, readline is used. Readline has a different note in its
manpage about this issue:
enable-keypad (Off)
Putting these lines into your .zshrc will fix the problems.
-## How can use meta in 8bit mode?
-
- St support meta in 8bit mode, but the default terminfo entry doesn't
- use this capability. If you want it, you have to use st-meta value
- in TERM.
+## How can I use meta in 8bit mode?
+
+St supports meta in 8bit mode, but the default terminfo entry doesn't
+use this capability. If you want it, you have to use the 'st-meta' value
+in TERM.
+
+## I cannot compile st in OpenBSD
+
+OpenBSD lacks librt, despite it being mandatory in POSIX
+<http://pubs.opengroup.org/onlinepubs/9699919799/utilities/c99.html#tag_20_11_13>.
+If you want to compile st for OpenBSD you have to remove -lrt from config.mk, and
+st will compile without any loss of functionality, because all the functions are
+included in libc on this platform.
+
+## The Backspace Case
+
+St is emulating the Linux way of handling backspace being delete and delete being
+backspace.
+
+This is an issue that was discussed in suckless mailing list
+<https://lists.suckless.org/dev/1404/20697.html>. Here is why some old grumpy
+terminal users wants its backspace to be how he feels it:
+
+ Well, I am going to comment why I want to change the behaviour
+ of this key. When ASCII was defined in 1968, communication
+ with computers was done using punched cards, or hardcopy
+ terminals (basically a typewriter machine connected with the
+ computer using a serial port). ASCII defines DELETE as 7F,
+ because, in punched-card terms, it means all the holes of the
+ card punched; it is thus a kind of 'physical delete'. In the
+ same way, the BACKSPACE key was a non-destructive backspace,
+ as on a typewriter. So, if you wanted to delete a character,
+ you had to BACKSPACE and then DELETE. Another use of BACKSPACE
+ was to type accented characters, for example 'a BACKSPACE `'.
+ The VT100 had no BACKSPACE key; it was generated using the
+ CONTROL key as another control character (CONTROL key sets to
+ 0 b7 b6 b5, so it converts H (code 0x48) into BACKSPACE (code
+ 0x08)), but it had a DELETE key in a similar position where
+ the BACKSPACE key is located today on common PC keyboards.
+ All the terminal emulators emulated the difference between
+ these keys correctly: the backspace key generated a BACKSPACE
+ (^H) and delete key generated a DELETE (^?).
+
+ But a problem arose when Linus Torvalds wrote Linux. Unlike
+ earlier terminals, the Linux virtual terminal (the terminal
+ emulator integrated in the kernel) returned a DELETE when
+ backspace was pressed, due to the VT100 having a DELETE key in
+ the same position. This created a lot of problems (see [1]
+ and [2]). Since Linux has become the king, a lot of terminal
+ emulators today generate a DELETE when the backspace key is
+ pressed in order to avoid problems with Linux. The result is
+ that the only way of generating a BACKSPACE on these systems
+ is by using CONTROL + H. (I also think that emacs had an
+ important point here because the CONTROL + H prefix is used
+ in emacs in some commands (help commands).)
+
+ From point of view of the kernel, you can change the key
+ for deleting a previous character with stty erase. When you
+ connect a real terminal into a machine you describe the type
+ of terminal, so getty configures the correct value of stty
+ erase for this terminal. In the case of terminal emulators,
+ however, you don't have any getty that can set the correct
+ value of stty erase, so you always get the default value.
+ For this reason, it is necessary to add 'stty erase ^H' to your
+ profile if you have changed the value of the backspace key.
+ Of course, another solution is for st itself to modify the
+ value of stty erase. I usually have the inverse problem:
+ when I connect to non-Unix machines, I have to press CONTROL +
+ h to get a BACKSPACE. The inverse problem occurs when a user
+ connects to my Unix machines from a different system with a
+ correct backspace key.
+
+ [1] http://www.ibb.net/~anne/keyboard.html
+ [2] http://www.tldp.org/HOWTO/Keyboard-and-Console-HOWTO-5.html
+
+## But I really want the old grumpy behaviour of my terminal
+
+Apply [1].
+
+[1] https://st.suckless.org/patches/delkey
+
+## Why do images not work in st (in programs such as w3m)?
+
+This is a terrible hack that overdraws an image on top of the terminal emulator
+window. It also relies on a very specific way the terminal draws it's contents.
+
+A more proper (but limited way) would be using sixels. Which st doesn't
+support.
+
+## BadLength X error in Xft when trying to render emoji
+
+Xft makes st crash when rendering color emojis with the following error:
+
+"X Error of failed request: BadLength (poly request too large or internal Xlib length error)"
+ Major opcode of failed request: 139 (RENDER)
+ Minor opcode of failed request: 20 (RenderAddGlyphs)
+ Serial number of failed request: 1595
+ Current serial number in output stream: 1818"
+
+This is a known bug in Xft (not st) which happens on some platforms and
+combination of particular fonts and fontconfig settings.
+
+See also:
+https://gitlab.freedesktop.org/xorg/lib/libxft/issues/6
+https://bugs.freedesktop.org/show_bug.cgi?id=107534
+https://bugzilla.redhat.com/show_bug.cgi?id=1498269
+
+The solution is to remove color emoji fonts or disable this in the fontconfig
+XML configuration. As an ugly workaround (which may work only on newer
+fontconfig versions (FC_COLOR)), the following code can be used to mask color
+fonts:
+
+ FcPatternAddBool(fcpattern, FC_COLOR, FcFalse);
+
+Please don't bother reporting this bug to st, but notify the upstream Xft
+developers about fixing this bug.