+ break;
+ case '\033': /* ESC */
+ csireset();
+ term.esc &= ~(ESC_CSI|ESC_ALTCHARSET|ESC_TEST);
+ term.esc |= ESC_START;
+ return;
+ case '\016': /* SO (LS1 -- Locking shift 1) */
+ case '\017': /* SI (LS0 -- Locking shift 0) */
+ term.charset = 1 - (ascii - '\016');
+ return;
+ case '\032': /* SUB */
+ tsetchar('?', &term.c.attr, term.c.x, term.c.y);
+ case '\030': /* CAN */
+ csireset();
+ break;
+ case '\005': /* ENQ (IGNORED) */
+ case '\000': /* NUL (IGNORED) */
+ case '\021': /* XON (IGNORED) */
+ case '\023': /* XOFF (IGNORED) */
+ case 0177: /* DEL (IGNORED) */
+ return;
+ case 0x84: /* TODO: IND */
+ break;
+ case 0x85: /* NEL -- Next line */
+ tnewline(1); /* always go to first col */
+ break;
+ case 0x88: /* HTS -- Horizontal tab stop */
+ term.tabs[term.c.x] = 1;
+ break;
+ case 0x8d: /* TODO: RI */
+ case 0x8e: /* TODO: SS2 */
+ case 0x8f: /* TODO: SS3 */
+ case 0x98: /* TODO: SOS */
+ break;
+ case 0x9a: /* DECID -- Identify Terminal */
+ ttywrite(vtiden, sizeof(vtiden) - 1);
+ break;
+ case 0x9b: /* TODO: CSI */
+ case 0x9c: /* TODO: ST */
+ break;
+ case 0x90: /* DCS -- Device Control String */
+ case 0x9f: /* APC -- Application Program Command */
+ case 0x9e: /* PM -- Privacy Message */
+ case 0x9d: /* OSC -- Operating System Command */
+ tstrsequence(ascii);
+ return;
+ }
+ /* only CAN, SUB, \a and C1 chars interrupt a sequence */
+ term.esc &= ~(ESC_STR_END|ESC_STR);
+}
+
+/*
+ * returns 1 when the sequence is finished and it hasn't to read
+ * more characters for this sequence, otherwise 0
+ */
+int
+eschandle(uchar ascii) {
+ switch(ascii) {
+ case '[':
+ term.esc |= ESC_CSI;
+ return 0;
+ case '#':
+ term.esc |= ESC_TEST;
+ return 0;
+ case 'P': /* DCS -- Device Control String */
+ case '_': /* APC -- Application Program Command */
+ case '^': /* PM -- Privacy Message */
+ case ']': /* OSC -- Operating System Command */
+ case 'k': /* old title set compatibility */
+ tstrsequence(ascii);
+ return 0;
+ case 'n': /* LS2 -- Locking shift 2 */
+ case 'o': /* LS3 -- Locking shift 3 */
+ term.charset = 2 + (ascii - 'n');
+ break;
+ case '(': /* GZD4 -- set primary charset G0 */
+ case ')': /* G1D4 -- set secondary charset G1 */
+ case '*': /* G2D4 -- set tertiary charset G2 */
+ case '+': /* G3D4 -- set quaternary charset G3 */
+ term.icharset = ascii - '(';
+ term.esc |= ESC_ALTCHARSET;
+ return 0;
+ case 'D': /* IND -- Linefeed */
+ if(term.c.y == term.bot) {
+ tscrollup(term.top, 1);
+ } else {
+ tmoveto(term.c.x, term.c.y+1);
+ }
+ break;
+ case 'E': /* NEL -- Next line */
+ tnewline(1); /* always go to first col */
+ break;
+ case 'H': /* HTS -- Horizontal tab stop */
+ term.tabs[term.c.x] = 1;
+ break;
+ case 'M': /* RI -- Reverse index */
+ if(term.c.y == term.top) {
+ tscrolldown(term.top, 1);
+ } else {
+ tmoveto(term.c.x, term.c.y-1);
+ }
+ break;
+ case 'Z': /* DECID -- Identify Terminal */
+ ttywrite(vtiden, sizeof(vtiden) - 1);
+ break;
+ case 'c': /* RIS -- Reset to inital state */
+ treset();
+ xresettitle();
+ xloadcols();
+ break;
+ case '=': /* DECPAM -- Application keypad */
+ term.mode |= MODE_APPKEYPAD;
+ break;
+ case '>': /* DECPNM -- Normal keypad */
+ term.mode &= ~MODE_APPKEYPAD;
+ break;
+ case '7': /* DECSC -- Save Cursor */
+ tcursor(CURSOR_SAVE);
+ break;
+ case '8': /* DECRC -- Restore Cursor */
+ tcursor(CURSOR_LOAD);
+ break;
+ case '\\': /* ST -- String Terminator */
+ if(term.esc & ESC_STR_END)
+ strhandle();
+ break;
+ default:
+ fprintf(stderr, "erresc: unknown sequence ESC 0x%02X '%c'\n",
+ (uchar) ascii, isprint(ascii)? ascii:'.');
+ break;
+ }
+ return 1;
+}
+
+void
+tputc(Rune u) {
+ char c[UTF_SIZ];
+ bool control;
+ int width, len;
+ Glyph *gp;
+
+ len = utf8encode(u, c);
+ if((width = wcwidth(u)) == -1) {
+ memcpy(c, "\357\277\275", 4); /* UTF_INVALID */
+ width = 1;
+ }
+
+ if(IS_SET(MODE_PRINT))
+ tprinter(c, len);
+ control = ISCONTROL(u);
+
+ /*
+ * STR sequence must be checked before anything else
+ * because it uses all following characters until it
+ * receives a ESC, a SUB, a ST or any other C1 control
+ * character.
+ */
+ if(term.esc & ESC_STR) {
+ if(u == '\a' || u == 030 || u == 032 || u == 033 ||
+ ISCONTROLC1(u)) {
+ term.esc &= ~(ESC_START|ESC_STR);
+ term.esc |= ESC_STR_END;
+ } else if(strescseq.len + len < sizeof(strescseq.buf) - 1) {
+ memmove(&strescseq.buf[strescseq.len], c, len);
+ strescseq.len += len;
+ return;
+ } else {
+ /*
+ * Here is a bug in terminals. If the user never sends
+ * some code to stop the str or esc command, then st
+ * will stop responding. But this is better than
+ * silently failing with unknown characters. At least
+ * then users will report back.
+ *
+ * In the case users ever get fixed, here is the code:
+ */
+ /*
+ * term.esc = 0;
+ * strhandle();
+ */
+ return;
+ }
+ }
+
+ /*
+ * Actions of control codes must be performed as soon they arrive
+ * because they can be embedded inside a control sequence, and
+ * they must not cause conflicts with sequences.
+ */
+ if(control) {
+ tcontrolcode(u);
+ /*
+ * control codes are not shown ever
+ */
+ return;
+ } else if(term.esc & ESC_START) {
+ if(term.esc & ESC_CSI) {
+ csiescseq.buf[csiescseq.len++] = u;
+ if(BETWEEN(u, 0x40, 0x7E)
+ || csiescseq.len >= \
+ sizeof(csiescseq.buf)-1) {
+ term.esc = 0;
+ csiparse();